Concentration — drug calculations
Drug concentration calculations: mg/mL, % and 1:1000
How to read and convert strengths: mg/mL, percentages, g/100 mL, ratios such as 1:1000 and micrograms/mL. A study aid with made-up examples.
What is concentration?
Concentration tells you how much medicine there is per volume of solution. It is the key between a dose in mg and a volume in mL.
Almost every drug calculation goes through the concentration: dose (mg) ÷ concentration (mg/mL) = volume (mL), and the other way round volume × concentration = amount. It therefore pays to master every way of writing it, so that you can quickly convert to mg/mL. The basic idea is also in dosage calculations, how to calculate mg per mL and the basics.
Amount (mg) = concentration (mg/mL) × volume (mL)
Volume (mL) = amount (mg) ÷ concentration (mg/mL)
This page is a study aid. The numbers in the examples are made up and are not dosing recommendations. Real doses come from the prescription and local policy.
Six ways of writing the same thing
| Notation | Example | How to read it |
|---|---|---|
| mg/mL | 5 mg/mL | Amount in each mL |
| X mg per Y mL | 250 mg per 5 mL | Divide: 250 ÷ 5 = 50 mg/mL |
| g/100 mL | 5 g/100 mL | 1 g = 1000 mg, so 5000 mg ÷ 100 mL = 50 mg/mL |
| Percentage | 1% | 1% = 1 g/100 mL = 10 mg/mL |
| Micrograms/mL | 250 micrograms/mL | 1000 micrograms = 1 mg, so 0.25 mg/mL |
| Ratio 1:1000 | 1:1000 | 1 g in 1000 mL = 1 mg/mL |
Remember: a percentage means grams per 100 mL, and 1 g per 100 mL is 10 mg/mL. That gives the rule 1% = 10 mg/mL, which you can use directly. Read more in percentage solutions and percent to mg/mL.
Nine worked examples
All numbers are practice examples. Real strengths and doses are given by the product information and the prescription.
A solution is 2%.
1% = 10 mg/mL, so 2% = 2 × 10 = 20 mg/mL.
A solution is 0.5%. How much is in 10 mL?
0.5 × 10 = 5 mg/mL. 10 mL × 5 mg/mL = 50 mg.
1:1000 means 1 g in 1000 mL.
1000 mg ÷ 1000 mL = 1 mg/mL. So 0.3 mL = 0.3 × 1 = 0.3 mg.
1:10,000 is ten times weaker: 1000 mg ÷ 10,000 mL = 0.1 mg/mL, which is 100 micrograms/mL.
Strength: 250 mg per 5 mL. Prescribed: 400 mg.
Concentration: 250 ÷ 5 = 50 mg/mL. Volume: 400 ÷ 50 = 8 mL.
The ampoule contains 40 mg in 2 mL.
40 ÷ 2 = 20 mg/mL. 20 mg/mL ÷ 10 = 2%.
A solution is 5 g/100 mL. How many grams are in 20 mL?
5 g = 5000 mg, ÷ 100 mL = 50 mg/mL (so 5%). 20 mL × 50 mg/mL = 1000 mg = 1 g.
The solution contains 0.25 mg/mL. Prescribed: 75 micrograms.
0.25 mg/mL = 250 micrograms/mL. 75 ÷ 250 = 0.3 mL.
The concentration is 500 micrograms/mL.
500 micrograms = 0.5 mg, so 0.5 mg/mL. 0.5 ÷ 10 = 0.05%.
1.5 g is dissolved in 250 mL.
1.5 g = 1500 mg. 1500 ÷ 250 = 6 mg/mL = 0.6%.
Quick conversion table
The same concentration in four notations.
| Percentage | mg/mL | micrograms/mL | Ratio |
|---|---|---|---|
| 0.1% | 1 mg/mL | 1000 micrograms/mL | 1:1000 |
| 1% | 10 mg/mL | 10,000 micrograms/mL | 1:100 |
| 0.01% | 0.1 mg/mL | 100 micrograms/mL | 1:10,000 |
| 5% | 50 mg/mL | 50,000 micrograms/mL | 1:20 |
A ratio of 1:N means 1 g in N mL, so mg/mL = 1000 ÷ N. The table is the same relationship as in the examples, set out for a quick check. Bear in mind that ratio strengths are written differently in different sources, so always read the product information.
Concentration in dilution
Dilution changes the concentration but not the amount of medicine. So C1 × V1 = C2 × V2 applies. Worked example: you want 100 mL at 5 mg/mL from a stock solution of 50 mg/mL. V1 = 100 × 5 ÷ 50 = 10 mL of stock solution, which is then made up to 100 mL. Check: 50 × 10 = 500 mg and 5 × 100 = 500 mg. Read more in dilution and the worked examples.
Strategy: always convert to mg/mL first
Write the concentration as mg/mL
That is the unit most formulas want. Percentage: times 10. Ratio 1:N: 1000 ÷ N. Micrograms/mL: divide by 1000.
Convert the dose to mg
Micrograms ÷ 1000, grams × 1000. See unit conversion.
Divide the dose by the concentration
The answer is mL. If it is a tablet, see tablets and oral liquids.
Sense check
Is the volume something that can be given? A decimal error gives a factor of ten.
Common mistakes with concentration
The most common mistake is believing that 1% is 1 mg/mL. It is 10 mg/mL. The second most common is mixing up amount and concentration: '250 mg per 5 mL' is not 250 mg/mL. Also check that the ratio 1:1000 is not read as 1%. 1:1000 is 0.1%, that is 1 mg/mL. Read about pitfalls in common drug calculation mistakes.
Practise with practice questions, the quiz and the practice test. Go on to the glossary and paediatric drug calculations, or micrograms per kg per minute. See also the formula sheet.
Study aid only. The numbers on this page are made-up practice examples, not dosing advice. Real doses come from the prescription and your local policy, and this page does not replace your course materials or your university's or NHS trust's guidance.
More drug calculations guides
Drug calculations course · Drug calculations basics · Drug calculations examples · Drug calculations glossary · Drug calculation mistakes · Drug calculations for nurses · Paediatric drug calculations · Micrograms per kg per minute calculation · Drug calculations formula sheet
Drug calculations · Drug calculations help · Drug calculations practice · Drug calculations past papers · Drug calculations app · Drug calculations website · Study drug calculations · Revise drug calculations · Pass drug calculations · Ace drug calculations · Drug calculation formulas
Frequently asked questions
What is 1% in mg/mL?+
1% is 1 g per 100 mL, which is 10 mg/mL. 2% is 20 mg/mL and 0.5% is 5 mg/mL.
What does 1:1000 mean?+
1 gram in 1000 mL, that is 1 mg/mL. It corresponds to 0.1%. 1:10,000 is 0.1 mg/mL, or 100 micrograms/mL.
How do you work out mg/mL from 'X mg per Y mL'?+
Divide the amount by the volume. 250 mg per 5 mL is 50 mg/mL.
How do you convert micrograms/mL to mg/mL?+
Divide by 1000. 500 micrograms/mL is 0.5 mg/mL.
How do you work out how much medicine is in a volume?+
Multiply the concentration by the volume. 10 mL of 5 mg/mL contains 50 mg.
How do you work out a percentage from mg/mL?+
Divide by 10. 20 mg/mL is 2%.
How does dilution relate to concentration?+
The amount is unchanged by dilution, so C1 × V1 = C2 × V2. 10 mL of 50 mg/mL made up to 100 mL becomes 5 mg/mL.
What is the difference between amount and concentration?+
Amount is how much (mg) there is in total, concentration is how much per mL. '250 mg per 5 mL' is an amount in a volume, which works out as 50 mg/mL.
Practise concentration questions
Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.