Common mistakes — drug calculations

Drug calculation mistakes: 12 errors and how to avoid them

Twelve mistakes many people make in drug calculations, with the wrong and right working side by side.

Short answer: the most common drug calculation mistakes are unit errors (mg and micrograms), misplaced decimals, forgetting the weight, misreading percentages, mixing up daily and single doses, rounding too early, the wrong drop factor and time, and skipping the sense check. Check units, decimals and sense before you answer.

Why the same mistakes keep happening

Most mistakes in drug calculations are not because people cannot do the maths. They happen because people work too quickly and skip the checks. The mistakes are also predictable: it is usually the same twelve that come back, and most involve units, decimals or answering the wrong question. A mistake on paper has no consequence, but the same thought pattern could have one in practice, so it is worth building the habit of checking early.

Read through the list below and try to find your own most common mistake. Write it down, put it at the top of your error log and check for that one before you hand in an answer.

12 common mistakes, wrong and right

The numbers are practice examples. All are worked through, but they do not replace a prescription or local policy.

01

1. Mixing mg and micrograms

Wrong: Prescribed 0.25 mg. The ampoule contains 250 micrograms/mL. 0.25 ÷ 250 = 0.001 mL.
Right: 0.25 mg = 250 micrograms. 250 ÷ 250 = 1 mL. Convert to the same unit before dividing. See unit conversion.

02

2. Decimal points and zeros

Wrong: Prescribed 0.5 mg, tablet 0.25 mg. Reads 0.5 as 5: 5 ÷ 0.25 = 20 tablets.
Right: 0.5 ÷ 0.25 = 2 tablets. Always write a zero before the decimal point (0.5, never .5) and avoid trailing zeros: 5.0 mg can be read as 50 mg, so write 5 mg.

03

3. Forgetting to calculate per kg

Wrong: Prescribed 15 mg/kg, the child weighs 18 kg. Gives 15 mg.
Right: 15 × 18 = 270 mg. If it says mg/kg you must always multiply by the weight. See dose per kg.

04

4. Misusing percentages

Wrong: Solution 2%. Reads it as 2 mg/mL. Dose 40 mg: 40 ÷ 2 = 20 mL.
Right: 2% = 2 g per 100 mL = 20 mg/mL. 40 ÷ 20 = 2 mL. The rule is 1% = 10 mg/mL. See percentage solutions.

05

5. Mixing up daily dose and single dose

Wrong: Prescribed 3 g per day divided into 3 doses, tablets 500 mg. 3000 ÷ 500 = 6 tablets each time.
Right: 3000 ÷ 3 = 1000 mg per dose. 1000 ÷ 500 = 2 tablets each time (6 in a day). See daily dose and timing.

06

6. Mixing up concentration and amount

Wrong: Prescribed 50 mg, solution 20 mg/mL. Divides the wrong way round: 20 ÷ 50 = 0.4 mL.
Right: Amount ÷ concentration: 50 ÷ 20 = 2.5 mL. Concentration (mg/mL) is how strong, amount (mg) is how much. See concentration.

07

7. Rounding too early

Wrong: 1000 mL over 6 hours, 20 drops/mL. 1000 ÷ 6 = 166.7 mL/h, 166.7 ÷ 60 = 2.78 mL/min, rounded to 3 mL/min. 3 × 20 = 60 drops/min.
Right: 1000 × 20 ÷ 360 = 55.56, so 56 drops/min. Round only at the end. See rounding.

08

8. Using the wrong drop factor

Wrong: 500 mL over 4 hours, set with 20 drops/mL. Uses 60 (a different set): 500 × 60 ÷ 240 = 125 drops/min.
Right: 500 × 20 ÷ 240 = 41.67, so 42 drops/min. Read the drop factor on the giving set actually used. See drop factor.

09

9. Hours instead of minutes

Wrong: 300 mL over 3 hours, 15 drops/mL. 300 × 15 ÷ 3 = 1500 drops/min.
Right: 3 hours = 180 minutes. 300 × 15 ÷ 180 = 25 drops/min. Drops are counted per minute, so the time must be in minutes.

10

10. Mixing up mL/h and drops/min

Wrong: 500 mL over 4 hours. Sets the infusion pump to 42 (drops/min).
Right: Pump: 500 ÷ 4 = 125 mL/h. Gravity with a 20 drops/mL set: 42 drops/min. Pumps are set in mL/h, drop counting is in drops/min. See infusion rate.

11

11. Dilution: final volume or added volume

Wrong: 10 mL of 50 mg/mL (500 mg) is to become 5 mg/mL. Adds 100 mL: final volume 110 mL, 500 ÷ 110 = 4.5 mg/mL.
Right: 500 mg ÷ 5 mg/mL = 100 mL final volume. Add 100 − 10 = 90 mL. See dilution.

12

12. Skipping the sense check

Wrong: Prescribed 0.5 mg, solution 5 mg/mL. 5 ÷ 0.5 = 10 mL. 10 mL contains 50 mg, a hundred times the prescribed dose.
Right: 0.5 ÷ 5 = 0.1 mL. A 10 mL injection for such a small dose should make you stop and recalculate.

Five steps to check yourself

01

Units

Are dose and strength in the same unit? Write the unit next to every number, and convert mg and micrograms first.

02

Signs and decimals

Read the prescription once more. Is the decimal point right, and did you read 0.5 as 0.5 and not 5?

03

Ask what is being asked

Should the answer be tablets, mL, mL/h or drops/min? Give the answer in that unit.

04

Sense check

Is the amount possible to give? Roughly: a few tablets, or one or a few mL for an injection. An answer ten times too big or small usually means a decimal or unit error.

05

Work backwards or another way

Multiply your answer by the strength. Do you get the prescribed dose back? Then it is probably right.

Example of a backwards check: an answer of 2.5 mL of 20 mg/mL gives 2.5 × 20 = 50 mg, which is the prescribed dose.

Train the mistakes away

These mistakes can be trained away. Start with the basics and the glossary, see more worked examples and look up formulas on the formula sheet. Then work through practice questions and take a practice test. More advice is in the 12 tips. If you are a nursing student, read drug calculations for nurses.

Worth knowing: Dos is a study aid for practising, not decision support in care. Always follow the prescription and local policy.

Study aid only. The numbers on this page are made-up practice examples, not dosing advice. Real doses come from the prescription and your local policy, and this page does not replace your course materials or your university's or NHS trust's guidance.

Frequently asked questions

What are the most common mistakes in drug calculations?+

Unit mistakes (mg and micrograms), decimal slips, forgetting to multiply by weight, misreading percentages, mixing up daily and single doses, and rounding too early.

How do I avoid mixing up mg and micrograms?+

Write the unit next to every number and convert to the same unit before dividing. 1 mg is 1000 micrograms. Write micrograms in full, not abbreviated.

Why is a misplaced decimal point so dangerous?+

A moved decimal point gives a factor of ten error. 0.5 mg becomes 5 mg if the point is lost. Always write a zero before the decimal point.

How do I do a sense check?+

Ask whether the amount could actually be given, and work backwards: your answer times the strength should give the prescribed dose.

When should I round?+

Only at the end of the calculation, and in the way your question or assessment asks. See the rounding guide.

What is the difference between mL/h and drops/min?+

Pumps are set in mL/h. Drop counting gives drops per minute and depends on the drop factor. They are two different answers to two different questions.

What is the difference between final volume and added volume in a dilution?+

The final volume is the total after dilution. The added volume is the final volume minus the volume of concentrate you started with.

Are these examples exam questions?+

No. They are original practice examples that show typical mistakes. Your assessment may look different.

Back to the drug calculations guide →

Practise until the mistakes disappear

Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.