Pump infusion — micrograms per kg per minute

Micrograms per kg per minute calculation: worked examples

How to work out mL/h from a dose in micrograms/kg/min, and the other way round, with unit analysis at every step. A study aid with made-up numbers.

Short answer: mL/h equals dose (micrograms/kg/min) × weight (kg) × 60 divided by the concentration in micrograms/mL. First convert mg/mL to micrograms/mL by multiplying by 1000. In reverse, the dose is mL/h × concentration ÷ (weight × 60). Write the units at every step.

Why the unit chain is the whole question

Pump infusions are often dosed in micrograms per kg per minute. The dose is small, the time is in minutes and the pump is set in mL per hour.

In drug calculations for pumps it is not the multiplication that is hard. It is that three different units must meet: micrograms/kg/min (the prescription), mg/mL (the strength of the medicine) and mL/h (the pump setting). If you write the unit at every step and cross out the ones that cancel, you can see straight away whether you have calculated correctly. The basics of infusion are in infusion rate and the basics of drug calculations.

This page is a study aid. The numbers in the examples are made up and are not dosing recommendations. Real doses come from the prescription and local policy.

The formula and the unit analysis

mL/h = dose (micrograms/kg/min) × weight (kg) × 60 (min/h) ÷ concentration (micrograms/mL)

Show the units: micrograms/(kg·min) × kg × min/h ÷ (micrograms/mL) = (micrograms/h) ÷ (micrograms/mL) = mL/h. The kg and minutes have cancelled, micrograms have cancelled against micrograms and what is left is mL/h. That is the check that the formula is right.

Step by step: (1) convert the concentration from mg/mL to micrograms/mL by multiplying by 1000, (2) work out micrograms per minute for the whole patient: dose × weight, (3) multiply by 60 to get micrograms per hour, (4) divide by the concentration to get mL/h. See unit conversion for mg and micrograms.

Reverse: dose (micrograms/kg/min) = mL/h × concentration (micrograms/mL) ÷ (weight × 60)

From 'mg in X mL' to concentration

Syringes and bags are often labelled as an amount of medicine in a volume. You get the concentration by dividing.

If it says 200 mg in 50 mL, the concentration is 200 ÷ 50 = 4 mg/mL, which is 4000 micrograms/mL. Read more in drug concentration calculations and how to calculate mg per mL. If the medicine is diluted before infusion, see dilution.

Seven worked examples

Fictional medicines and doses. The method is what you are practising.

Example 1: strength in mg/mL
Prescribed: 5 micrograms/kg/min. Weight 70 kg. Concentration 1 mg/mL = 1000 micrograms/mL.
5 × 70 × 60 ÷ 1000 = 21,000 ÷ 1000 = 21 mL/h.
Units: micrograms/(kg·min) × kg × min/h ÷ (micrograms/mL) = mL/h.
Example 2: syringe of 50 mg in 50 mL
Concentration 50 ÷ 50 = 1 mg/mL = 1000 micrograms/mL. Prescribed: 2 micrograms/kg/min. Weight 80 kg.
2 × 80 × 60 ÷ 1000 = 9,600 ÷ 1000 = 9.6 mL/h.
Example 3: stronger syringe, 200 mg in 50 mL
Concentration 200 ÷ 50 = 4 mg/mL = 4000 micrograms/mL. Prescribed: 10 micrograms/kg/min. Weight 60 kg.
10 × 60 × 60 ÷ 4000 = 36,000 ÷ 4000 = 9 mL/h.
Example 4: in reverse, which dose is running?
The pump is set to 12 mL/h. Syringe: 80 mg in 50 mL = 1.6 mg/mL = 1600 micrograms/mL. Weight 75 kg.
Dose = 12 × 1600 ÷ (75 × 60) = 19,200 ÷ 4,500 = 4.2667 micrograms/kg/min (about 4.27).
Check: 4.2667 × 75 × 60 ÷ 1600 = 12 mL/h.
Example 5: small dose and the pump's resolution
Prescribed: 0.05 micrograms/kg/min. Weight 70 kg. Syringe: 4 mg in 50 mL = 80 micrograms/mL.
0.05 × 70 × 60 ÷ 80 = 210 ÷ 80 = 2.625 mL/h.
If the pump can only be set in tenths of a mL/h, 2.6 mL/h corresponds to 0.0495 micrograms/kg/min. The difference is small but real, which is why a concentration is chosen that gives a suitable rate.
Example 6: small child
Prescribed: 8 micrograms/kg/min. Weight 4.5 kg. Syringe: 50 mg in 100 mL = 0.5 mg/mL = 500 micrograms/mL.
8 × 4.5 × 60 ÷ 500 = 2,160 ÷ 500 = 4.32 mL/h.
Example 7: prescription in mg/kg/h
Prescribed: 0.5 mg/kg/h. Weight 70 kg. Concentration 1 mg/mL.
No conversion of minutes is needed here: 0.5 × 70 ÷ 1 = 35 mL/h.
To express the dose in micrograms/kg/min: 0.5 mg/kg/h = 500 micrograms/kg/h = 500 ÷ 60 = 8.3333 micrograms/kg/min.

Quick reference table

Rate in mL/h when the concentration is 1 mg/mL (1000 micrograms/mL). Worked out with the formula above.

Dose50 kg70 kg90 kg
1 microgram/kg/min34.25.4
2 micrograms/kg/min68.410.8
5 micrograms/kg/min152127
10 micrograms/kg/min304254

If the concentration is four times stronger, the rate is a quarter. The table is a check of order of magnitude, not a replacement for the calculation. For example: 5 micrograms/kg/min for 70 kg gives 21 mL/h at 1 mg/mL, which matches example 1.

A shortcut you should understand, not just use

On some wards the syringe is mixed by a rule such as '3 × weight in mg in 50 mL'. With it, 1 mL/h is exactly 1 microgram/kg/min. That follows from the formula: the concentration becomes 3 × weight ÷ 50 mg/mL = 60 × weight micrograms/mL, and then weight and 60 cancel. Worked example: 10 kg gives 30 mg in 50 mL = 600 micrograms/mL, and 7 micrograms/kg/min becomes 7 × 10 × 60 ÷ 600 = 7 mL/h. Whether such a rule is used, and which one a ward prefers, is set by local policy, and you should be able to check the answer with the full formula.

Worth knowing: Prescription, dilution schedule and pump settings are decided by local policy. Here you are only practising the calculation.

Common mistakes and how to avoid them

01

mg and micrograms are mixed up

Always convert the concentration to micrograms/mL first. The factor of 1000 is the most common error, see common drug calculation mistakes.

02

The minutes are forgotten

The dose is per minute, the pump runs per hour. Multiply by 60.

03

The weight is missing

A dose per kg needs a weight. Check that the right weight is used.

04

The answer is unreasonable

Compare with the table above. An answer ten times too big usually means a misplaced decimal point.

05

Timing is mixed up

Keep rate and time apart: the infusion time calculator and drip rate are different questions.

Continue with the practice page, a practice test and the formula sheet. See also drug calculations for nurses and the glossary.

Study aid only. The numbers on this page are made-up practice examples, not dosing advice. Real doses come from the prescription and your local policy, and this page does not replace your course materials or your university's or NHS trust's guidance.

Frequently asked questions

How do you calculate mL/h from micrograms/kg/min?+

Multiply the dose by the weight and by 60, then divide by the concentration in micrograms/mL. 5 micrograms/kg/min for 70 kg at 1000 micrograms/mL gives 21 mL/h.

Why do you multiply by 60?+

The dose is per minute but the pump runs per hour, and an hour has 60 minutes.

How do you convert mg/mL to micrograms/mL?+

Multiply by 1000. 1 mg/mL is 1000 micrograms/mL, and 4 mg/mL is 4000 micrograms/mL.

How do you work out the concentration of a syringe labelled 'mg in X mL'?+

Divide the amount by the volume. 200 mg in 50 mL is 4 mg/mL, so 4000 micrograms/mL.

How do you work out which dose is running at a given rate?+

Dose = mL/h × concentration ÷ (weight × 60). 12 mL/h at 1600 micrograms/mL for 75 kg gives about 4.27 micrograms/kg/min.

What does the rule '3 × weight in 50 mL' mean?+

It gives a concentration where 1 mL/h equals 1 microgram/kg/min. Whether it is used is set by local policy, and you should be able to check with the formula.

How do you convert mg/kg/h to micrograms/kg/min?+

Multiply by 1000 and divide by 60. 0.5 mg/kg/h is about 8.33 micrograms/kg/min.

Are the numbers on this page real doses?+

No. They are made up and practise the method. Doses come from the prescription and local policy.

Back to the drug calculations guide →

Practise pump calculations

Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.