Basics — drug calculations

Drug calculations basics: how to start

A beginner's guide to dose, strength, units and a calculation routine that works on every question.

Short answer: the basics of drug calculations are the prescribed dose, the strength, the amount and the unit. You work out the amount by dividing the dose by the strength, after converting to the same unit. Ask what you want and what you have, calculate one step at a time and check that the answer is sensible.

What drug calculations are about

It is basically division and multiplication with units.

Drug calculations means turning a prescription into something you can give: a number of tablets, a volume in mL or a pump setting. It is not advanced maths, but it demands care with units. For a broad introduction, read What are drug calculations? This page is a study aid, not for clinical decisions.

The four quantities

Almost every question is about the same four things.

QuantityMeaningExample
Prescribed doseHow much medicine the patient is to receive500 mg
Strength or concentrationHow much medicine is in each tablet or each mL250 mg per tablet, 10 mg/mL
AmountWhat you work out and give: tablets or mL2 tablets
UnitThe measure the number refers tomg, micrograms, g, mL, units, mmol

The relationship is: amount = prescribed dose ÷ strength. With the example above, 500 ÷ 250 = 2 tablets. All the formulas are on the formula sheet and the formulas page.

Prefixes and units

Milli and micro cause most of the confusion.

UnitIsEquals
gram (g)1 g1000 mg
milligram (mg)1 mg1000 micrograms
microgram1 microgram0.001 mg
litre (L)1 L1000 mL

Going down in size (from g to mg, from mg to micrograms) you multiply by 1000. Going up, you divide by 1000. Always write the word micrograms in full. Example: 2.4 g = 2400 mg, not 2.4 mg. Read more in unit conversion.

What do I want, and what do I have?

A routine that works on every question.

01

What do I want?

Write down what you are looking for, with its unit, for example 'mL to draw up'.

02

What do I have?

Write down the prescription and strength, with units.

03

Make the units the same

Dose and strength must be in the same unit before you divide.

04

Choose the calculation

Divide the dose by the strength. Then, if needed, multiply by the volume.

05

Check

Does the answer give a sensible amount? Round last.

Example: prescribed 90 mg. Tablets are 30 mg.
Want: number of tablets. Have: 90 mg and 30 mg per tablet. Same unit. 90 ÷ 30 = 3 tablets.

More steps are on the drug calculations help page.

The order of a calculation

Work in this order: 1) convert units, 2) work out what the dose means (for example weight × dose per kg), 3) divide by the strength, 4) multiply by the volume if the strength is given per several mL, 5) round. Example: 60 kg and 0.5 mg/kg gives 30 mg. A solution of 10 mg/mL gives 30 ÷ 10 = 3 mL. The order matters: never round intermediate steps. See rounding in drug calculations.

The sense check

After every calculation, ask whether the answer seems reasonable. 12 tablets or 0.02 mL are signals that something may have gone wrong, for example a mg and micrograms mix-up. A unit error often gives an answer that is 1000 times too big or too small. The check takes ten seconds and catches many errors. Read common drug calculation mistakes.

What a prescription looks like

It usually contains the drug, dose, route and time or interval.

PartExampleMeaning
DrugName, sometimes with the formThe substance to be given
Dose200 mgHow much per administration
Routeoral, intravenousHow it is to be given
Frequency3 times a dayHow often

Example: '200 mg three times a day, oral'. That means 200 mg per dose and three doses, so 600 mg per day (200 × 3 = 600). See daily dose and timing. How prescriptions are written can differ between hospitals and trusts.

Common confusion for beginners

01

Dose and strength are mixed up

The dose is what is to be given. The strength is what the packaging contains.

02

mg per mL is mixed up with mg in total

A 10 mg/mL solution in 5 mL contains 50 mg in total.

03

Percentages feel abstract

1% is 10 mg/mL. 0.1% is 1 mg/mL.

04

The answer is given in the wrong unit

Read what is asked for: mL, mg or tablets.

05

Doing it in your head

Write down the steps. See the tips.

Read the strength on the packaging

The same drug can come in several strengths, so read the numbers carefully.

A label can show strength per tablet (25 mg), per mL (50 mg/mL) or the total content of the container (100 mg in 2 mL). They are the same thing expressed differently: 50 mg/mL in 2 mL is 50 × 2 = 100 mg in total. If 20 mg is prescribed, that is 20 ÷ 50 = 0.4 mL. So always ask whether a number applies per unit or in total.

Example: prescribed 0.075 mg. Tablets are 25 micrograms.
Steps: 0.075 mg × 1000 = 75 micrograms. 75 ÷ 25 = 3 tablets.

If you find it easy to slip up, that is normal. That is why the check steps exist: same unit, sensible answer, round last.

Two ways of thinking

Some people think in proportions: 'one tablet has 25 micrograms, so how many for 75?' Others think in formulas: dose ÷ strength. Both give the same answer, so choose the one that is clearest to you. What matters most is that you can explain every step and write the unit next to every number. The routine gets faster with practice, and you can test yourself with the quiz.

Next steps

For more solved questions see drug calculations examples, for the terms see the drug calculations glossary and then concentration. Practise with practice questions or a practice test. If you are studying nursing, read drug calculations for nurses and the course guide. The app is covered on the drug calculations app page.

Study aid only. The numbers on this page are made-up practice examples, not dosing advice. Real doses come from the prescription and your local policy, and this page does not replace your course materials or your university's or NHS trust's guidance.

Frequently asked questions

What are the basics of drug calculations?+

Understanding prescribed dose, strength, amount and unit, and dividing the dose by the strength once the units are the same.

What is the most important formula?+

Amount = prescribed dose ÷ strength. If the strength is given per several mL, multiply by the volume afterwards.

What is the difference between dose and strength?+

The dose is what the patient is to receive. The strength is how much medicine is in each tablet or each mL.

How many micrograms are in a mg?+

1 mg is 1000 micrograms.

Why are units so important?+

A wrong unit can give an answer that is 1000 times too big or too small.

Do you have to be good at maths?+

You need to be able to multiply, divide and work with decimals. The routine does the rest.

How do I do a sense check?+

Ask whether the number of tablets or mL is something that would actually be given. Unreasonable answers point to a unit error.

How do I practise the basics?+

Start with simple tablet and liquid questions, then move on to practice tests.

Back to the drug calculations guide →

Test yourself on the basics

Dos is a practice app for drug calculations. It has practice tests of ten questions, a built-in calculator next to each question, and statistics per topic.